EFAP-S752 - Etasis EFAP-S752 Power Supply

EFAP-S752 - Etasis EFAP-S752 Power Supply - 2U Single 750W Simple Type:...

Etasis EFAP-S752 Power Supply - 2U Single 750W Simple Type: Power Supply

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Efficiency: 80%
Hold up Time: 17mS minimum, at 80% of maximum load
Input Current: 10 – 4.5A
Input Frequency: 47-63 Hz
Input Range: 100 to 240 VAC, +/-10%
Input Voltage: 100-240VAC
Note: The +5 & +3.3 Volt combine total output shall not exceed 150W. The +5, +3.3 and +12 Volt combine total output shall not exceed 732W. Noise bandwidth is from DC to 20 MHz.
Operating Humidity: 20 to 90 %
Operating Temperature: 0 to 50 C
Output Load +12V: Max Load 60A. Min Load 1A.
Output Load +3.3V: Max Load 26A. Min Load 0.5A
Output Load +5V: Max Load 26A. Min Load 0.5A
Output Load +5Vsb: Max Load 3A. Min Load 0A.
Output Load -12V: Max Load 0.5A. Min Load 0.1A.
Output Voltage +12V: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Voltage +3.3V: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage +5V: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 60mV.
Output Voltage +5VSB: Regulation Load ±5%, Regulation Cross ±5%, Regulation Line ±1%, Output Ripple & Noise Max. 50mV.
Output Voltage -12V: Regulation Load ±10%, Regulation Cross ±10%, Regulation Line ±1%, Output Ripple & Noise Max. 120mV.
Output Watt: 750W
Power Factor: 0.97 minimum at full load
Power Good: 100 to 500 ms, TTL compatible signal
PSON (Remote ON/OFF): TTL compatible signal