EFRP-302A - Etasis EFRP-302A Redundant Power Supply. 300W Modular | V1: +5V/30A...
- Part Number:
- EFRP-302A
- Model Number:
- EFRP-302A
- Make:
- ETASIS
- Lead Time:
- Available
- Qty In Stock:
- Available
Etasis EFRP-302A Redundant Power Supply. 300W Modular | V1: +5V/30A | V2: +3.3V/28A | V3: +12V/15A | V4: -5V/0.3A | V5: -12V/0.8A | V6: +5Vsb/2A DC Outputs | AC 100-240V~; 5A-2.5A Max; 47-63Hz Input. Simple Type: Redundant Power Supply
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 300W of total power
- Front panel LEDs to indicate AC input and DC output power status
- Gold-plated DIN connector provides higher reliability
- Harmonic distortion meets the EN61000-3-2 standards
- Internal Oring Diode for N + 1 redundant application
- MTBF>100,000 hours
- Power fault alarm signals
- Remote sense on 5V, 3.3V, and 12V outputs
- Single wire current share on 5V, 3.3V, and 12V outputs
- Universal power input with active power factor correction, PF>0.95
- W x H x D: 124 x 40.6 x 196.6mm
Specifications
- Cooling: Cooling via self-contained fan
- Efficiency: >65% at full load and nominal AC input voltage
- Hold-up time: at least 20mS at full load and nominal AC input voltage
- Humidity: 20~90% non-condensing
- Input Current: 6 amps @ 115VAC/3 amps @ 230VAC
- Input Frequency: 47-63 Hz
- Input Range: 100~240 VAC
- Maximum power: 300W
- MTBF: > 100,000 hours at 75% load and 25°C ambient conditions
- Operating Temperature: 0-50°C
- Over Current Protection: set at 110-130% of 5V, 3.3 and 12V outputs
- Over Power Protection: total putput 110-130% max
- Over Voltage Protection: set at 110-130% of 5V, 3.3 and 12V outputs
- Power Good Signal: TTL compatible; Signal goes high after turn-on 100-500ms. Signal goes low at least 1ms before the +5V loss of regulation.
- Safety: FCC Part 15, Class B; CISPR 22(EN55022), Class B; VCCI Class2
Applications
- None Available
Aliases
- None Available
